Hardware Specification

TL-R1620Sep-RP

Drive Bay 16 x 3.5-inch SAS 12Gb/s, SAS/SATA 6Gb/s

Drive Compatibility 3.5-inch bays:

3.5-inch SAS/SATA hard disk drives

2.5-inch SAS/SATA hard disk drives

2.5-inch SAS/SATA solid state drives

Hot-swappable Yes

Form Factor 3U Rackmount

Host Interface 4 x Mini-SAS HD (SFF-8644)

LED Indicators Front panel: HDD 1-16, Power, Status, Link, Fan error

Rear panel: SAS connector, Enclosure ID

Buttons Power

Dimensions (HxWxD) 131.3 × 482.2 × 425.3 mm

Weight (Net) 11.48 kg

Weight (Gross) 16.01 kg

Max. number of

HDDs/SSDs supported

16

Hard Drive Type 3.5" or 2.5" SAS 12Gb/s, SAS/SATA 6Gb/s and 3Gb/s drives

Operating temperature 0 - 40 °C (32°F - 104°F)

Relative Humidity 5-95% RH non-condensing, wet bulb: 27?C (80.6?F)

Power Supply Unit 550W(x2), 100-240V

Power Consumption:

Operating Mode, Typical

207.13 W

Fan 3 x 80mm, 12VDC

Sound Level 36 db(A)

System Warning Buzzer

Management Managed via QNAP QTS / QuTS hero OS

1. Supports disk S.M.A.R.T. information

2. RAID expansion enclosure identifier

3. Locate RAID expansion enclosures

4. Locate hard disks on RAID expansion enclosure

5. Smart fan control by detecting system and hard drive temperature

6. In-band SAS firmware update

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory

slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors,

or prevent the operating system from starting.

* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front

of operating NAS.

Designs and specifications are subject to change without notice.